Month: February 2021

Garage Door Not Working – Some Common Problems

There are two basic operating components of the garage door. One is the garage door opener and garage door mechanism which includes the garage door itself, the panels, springs, tracks, and rollers which allow the garage door to go and down smoothly. Since the garage door is the largest moving object in a home. It can become big trouble if not maintained properly. If you need to conduct a garage door repair, you should start the work from the obvious things and continue the work until the exact problems are not traced. Some garage door problems are mechanical and some are happened due to the wrong installation of any part. If you are not sure how to handle the garage door, contact a professional garage door expert like Hogan & Son Garage Door Repair to help you.

Problems of Garage door opener:

There is a number of things that can contribute to the malfunctioning of the opener. It is best to start with the easiest points to fix it. First of all, make sure that the opener is getting enough power and the breaker has not been fused. Make sure it is fully plugged into the right outlet. If the opener looks fine but the garage door won’t open with the help of a remote. You should check the batteries of the remote. Replace the batteries with new ones. If it still does not work, you may need to buy a new remote.

Faults of garage door mechanism:

If the garage door is sagging to one side while going up and down, you should check its mechanism. One obvious thing is to check the tracks that become clogged due to dirt and hardened grease. Use mild household detergent and a soft car brush to wash the tracks and then use any high-quality lubricant like WD-40 to smooth all the moving parts and rollers to make sure that they are will work properly.

Check the garage door tracks thoroughly to find out the dents, bumps, and damages on the tracks. They are connected to the trim of the door along with the ceiling with the help of brackets. With the passage of time, these brackets become loose and need to be replaced. Another problematic area could be garage door rollers. If you have a wood garage door then the strains on the screws can push them to wiggle and eventually loose. Use a large screwdriver to fix them.

NOTE: Be careful while working on garage door springs. These are heavy metal devices that can be dangerous if you don’t know how to handle them. It is advisable to leave them to the professionals.

Bottom line: It is good to determine what and how to do and when you need someone else who is really qualified, experienced, and trained to accomplish a job. Don’t take a chance on making creating more trouble by doing wrong work because it might cause bigger trouble.

 

Tips on Maintaining Garage Door Torsion Springs and Cables

The most important and critical part of the garage door is the torsion springs which support it to open and close smoothly. However, poorly installed, malfunctioning, or worn-out garage doors can present big safety trouble.

It is true that the garage door needs regular maintenance and upkeep services in order to stay in tip-top condition. To maintain the functionality of the garage door, you need to conduct the inspection, maintenance, and lubrication task on the system. As it is an important part to keep your garage door safe and operational at all. Unfortunately, the majority of homeowners are unaware of the fact that torsion springs work along with several other parts of the garage door which also need occasional safety checkups and maintenance services. It is always recommended that hire a professional garage door technician like, Newtown, CT garage door spring repair to keep your garage door functioning well.

If you are experiencing any trouble while opening and closing your garage door, you will have to pay close attention to the torsion springs which is the most obvious fact. If your garage door is older, the springs may probably wear out to a certain stage of their life.

The torsion springs installed on a garage door are tightly wound and placed under extreme pressure. Due to the risk of sudden breakage, the torsion springs have to be contained in order to avoid serious injuries or property damages. These containments are either in the form of external steel tubes or metal cables.

Even the contained torsion springs should be inspected by a professional garage door technician. They have the right tools and abilities to replace the springs if required. If your garage door has two independent springs and only one is worn out, it makes sense to replace both the springs simultaneously. Your garage door may create a chattering noise or squeaky sound when the garage door is going up and down. It does not necessarily indicate that your torsion springs are on their last legs and need to be replaced immediately.

Another clear sign indicates that the springs on your garage door need to be replaced, if there are frayed, hanging, or broken strips of cables. Irrespective of the quality and strength of the electric opener, it is a clear indication that the cables are about to break up. A sudden fall of cables could cause serious injuries. The frayed or broken cables need to be replaced by professional experts who are well familiar with the problems concerning springs and cables.

The garage door by itself is a bulky and heavy equipment and due to that weight, the torsion springs need to be adjusted under a high amount of pressure. Therefore, you should not try any mechanical alternatives on your own due to the high risks involved in performing this job. It would be advised that hire a professional garage door contractor to inspect these important components every year to avoid potential injuries and problems caused by broken torsion garage door springs.