Author: Carl Wells

Garage Door Springs – The Part That Powers It

It is really interesting when you look at the history and development of garage doors. DO you know that once garages are constructed as carriage houses to keep horses and store buggies?

Actually, when we think about it, the concept really makes sense. Garages are sued to keep your vehicle close to your home and protecting it from thieves and outside weather. The first modern garage was constructed during the 1900s when the first production car was invented. With the advancement in transport technology, garages and garage doors have covered a long distance. You should consult a professional and reliable Dallas, North Carolina garage door spring repair service to learn more about the development of garage door springs.

The best garage door innovation is the “garage door springs”. I know, some people believe that an electric garage door opener is the best advancement in the field of a garage door. Believe me, without a good set of springs, the automatic garage door would not be able to lift or lower smoothly and effortlessly. These springs are used to make the opening and closing process so easy. Without a good set of springs, you would have to lift the heavyweight of the garage door by hand.

Unfortunately, these garage door springs experience general wear and tear over time but they are the most ignored parts of the garage door. If you have enough and smart DIY skills to recognize that something is going wrong with the adjustment of garage door springs but you are on the wrong side when you believe that you can troubleshoot the garage door springs problems on your own, take a break! Since fixing or replacing the garage door springs on your own can be a bit challenging, an ordinary person cannot do the job with the right skills and tools. It is also recommended that hire a professional garage door spring repair service to handle the malfunctioning or broken springs.

If your garage door is five years or more old, you should definitely inspect the garage door springs to see if they are in a good working position. Believe me, the last thing that you don’t want to have is your broken springs and there will be no way to open or close your garage door. Finding the right springs and installing them is not an easy job. Your local hardware store does not normally have torsion springs in its stock. Garage door manufacturers are advised to sell the spring only to authorized dealers and certified technicians. You might think that you will have to replace the entire garage door if you don’t know where to find appropriate springs. While replacing the springs, make sure to replace both of them.

Here is a valuable secret. If you cannot find a reliable garage door repair company, you will be able to find everything on the internet.




Important Points for installing a new Garage Door

Today when we think about residential garage doors, we all agree that automatic garage doors are the most widely used ones. They are remotely controlled garage doors that are highly convenient to operate and offer a great amount of security. In the fast-developing world, where “time” is considered as money, people prefer to have automatic overhead garage doors. 

A lot of planning is needed to ensure an effective garage door installation project. Nowadays, almost every residential building is constructed with a garage; a correctly installed garage door by professional garage door companies like, Jacksonville Garage Door Repair can actually enhance the beauty of your house. However, there are some points to keep in mind before you hire someone professional to install the garage door for you.

·         Reputed garage door technicians: Experienced and famous garage door technicians are always preferred when it comes to installing a new garage door. These experts should be mechanically competent and have the right experience and knowledge in the field of garage door installation.

·         Garage door repair services: The registered garage door company that installs a garage door for you should also offer any type of repair services. It is always suggested to have a garage door company that performs both installation and repair jobs.

·         Type of garage door: In the market, there is a wide variety of garage doors. Homeowners normally look for two things before picking a garage door, one is functionality and attractiveness. You must check the latest fashion magazines and architectural newspapers to have a good idea about new models of garage doors.  

·         Insulation features of garage door: If you are living in an area with extreme climate conditions, it would be wise to install a garage door that is well-insulated. Extreme temperature and dramatically changing atmospheric conditions can hamper the texture of your expensive cars. It is always good to hire someone who is properly educated, trained, and skilled in the field of garage door installation. 

·         Warranty and guaranty: Before buying a garage door for your house, you should always check the warranty and guaranty offered by the manufacturer for the particular product. Don’t hesitate to ask them relevant questions and try to get the answers in a written format, if possible.





Garage Door Repair – Helpful Tips That You Can Follow

A garage door is one of that equipment in your house that is used almost every day. You feel safe and comfortable that your car is safe once you park it in your garage. However, it is obvious to feel uncomfortable and unsecured if such an important structure does not work properly.

In order to avoid these situations, it is recommended to conduct regular garage door maintenance services. It will help you to keep your system in a tip-top position and also enhance its overall life span. Most garage door experts from some major companies strongly recommended you that don’t try to handle malfunctioning garage doors on your own. They suggest hiring a certified garage door company like, Pittsburgh garage door repair service who deals in the garage door business to take care of any type of mechanical fault with your garage door. Well, it is not a bad option to inspect the heavy structure on your own to make sure that nothing serious happens to your garage door. Following are the effective tips and techniques that can help you in this regard.

Garage door does not open or close smoothly: This is one of the most common garage door problems with your garage door. Most of the time, it is happened due to dust particles and accumulated greases stuck on the metal tracks. The best and effective solution is to clean the tracks and rollers using any household cleaner and water and then wipe them to dry with the help of the cloth. However, it is extremely essential to properly lubricate these components using any light silicone oil once they have been cleaned. You may use powdered graphite and high-quality silicone spray for this purpose.

Inspect the garage door to find out any defective tracks: In some situations, even after applying proper lubrication, you may find an experience that such a heavy structure is not working properly. In this case, there is a possibility that the garage door tracks may be damaged, dented, or defective at some portions. You should try to hit the defective area with the help of a rubber mallet or wood hamper. If these techniques do not help you to fix the problem of the garage door, then hire garage door experts who deal in this industry. It is something which is practiced by plenty of garage door companies in the major cities within the USA.






Garage Door Opener Types

In the past, the garage door could only be raised or lower by holding the handle at the bottom of the garage door. Today, garage doors can open and close using a single push of a button. In order to operate the garage door automatically, you need some type of openers. The technology of openers was invented in the 1920s. These garage door openers can be operated by a handy device or remote or from a wall-mounted switch. Visit the link to know more different types of garage door openers available in the market.

Belt drives garage door opener: This option is quite as compared to a chain-driven garage door opener. It can be ideal for a garage door that is next to or below the living room. A belt-driven garage door opener is stronger, durable but costly than chain driven. This is why; many people prefer to have this. The main unit of the garage door opener consists of a rubber belt instead of a metal chain.

Chain drives garage door opener: This is one of the famous and cheapest types of openers. It is very easy to install and operate because it is basically a steel chain attached to the motor of the garage door opener. It can be activated using a remote control or a wall-mounted switch. When you command the garage door opener, its main switch is turned on with the shaft and sprocket chain to lift the garage door up. It is the noisiest type of garage door opener. The first model of chain-driven garage door opener is created by C.G.Johnson. Normally these openers can be operated using a remote but a wall-mounted switch is also installed for better access both from inside and outside of the garage door.

Screw drive garage door opener: It is a famous automatic garage door opener which is manufactured by “Genie”. It is operated by the motor which is known as “Direct driver”.  A garage door is raised or lowers with the help of a threaded steel rod. It functions when its motor is switched on without using chains or belts which makes it more efficient and silent.

While choosing a garage door opener for your home, you should look at the power requirements you need to operate the garage door. If you have installed a single garage door then a smaller motor will be enough but if you have a double garage door then you will need to buy a motor with at least ½ horsepower. You should choose a garage door opener that is equipped with a safety mechanism to prevent the garage door from closing if something on the path of a garage door. The electronic beams and safety sensors stop the garage door from closing on someone or something and help to prevent accidents that could be serious and even fatal.

Another important safety feature of automatic garage door openers is rolling code technology. It works to change the signals each time you activate the garage door. It will also prevent the crossed signals of the opener with your neighbors and protects your security passcode. You should choose the simplest one that suits your need.



When To Repair Garage Doors

The garage door or any other electric equipment needs to be maintained to keep functioning in the long run. It means that if the garage door becomes faulty, worn out, or malfunction it should be fixed as fast as humanly possible.

In simple words, repair and maintenance of garage door will make it last longer and also serve you better. It is a common practice of garage doors. Due to the frequent operations of garage doors, repair and maintenance become essential for the owner. Negligence in garage door care and maintenance will destroy the structure of the garage door to extend it won’t be functional anymore. If you are not sure how to handle a malfunctioning garage door, you should hire a professional garage door contractor like, garage door repair specialists San Antonio to handle it.

However, to be able to maintain and repair your garage door on your own, there are few important pointers you have to be aware of. First of all, you should be able to determine what is faulty on your garage door. This way you will be able to get it fixed as fast as possible before the damages get worsen. It is also important to do earlier detection and find out their solutions as the more damages the more it will charge you to repair them. There are two main components of the garage door that are likely to need to be fixed. One is a garage door opener and the other is the garage door itself.

Since a garage door is constantly running on metal tracks which may become misaligned due to loose mounting brackets which connect the tracks to and walls and ceiling of the garage. To solve this problem, you should tighten the screws and bolts of the brackets to make them secure. To perform this task, you will have to work from inside the garage while keeping your garage door closed. Garage door tracks may become seriously damaged. The only solution is to replace the tracks with new ones. However, if they are not completely broken, you can pound them back into their original position using a rubber mallet or wooden hammer.

The metal tracks should be aligned and balanced properly. They should be pounded to make sure that they are straightened. These tracks may not function due to the accumulated dust, dirt, and grease on them. They should be cleaned thoroughly to remove these obstructions on the tracks. While conducting a garage door repair doesn’t forget to inspect the torsion springs if they lose their tension, then they should be adjusted according. Broken garage door springs should be replaced with new ones to keep your garage door functional. Remember, torsion springs hold extreme pressure which can be dangerous to handle. Call a professional garage door expert to replace the broken garage door springs and helps you.



Garage Door Not Working – Some Common Problems

There are two basic operating components of the garage door. One is the garage door opener and garage door mechanism which includes the garage door itself, the panels, springs, tracks, and rollers which allow the garage door to go and down smoothly. Since the garage door is the largest moving object in a home. It can become big trouble if not maintained properly. If you need to conduct a garage door repair, you should start the work from the obvious things and continue the work until the exact problems are not traced. Some garage door problems are mechanical and some are happened due to the wrong installation of any part. If you are not sure how to handle the garage door, contact a professional garage door expert like Hogan & Son Garage Door Repair to help you.

Problems of Garage door opener:

There is a number of things that can contribute to the malfunctioning of the opener. It is best to start with the easiest points to fix it. First of all, make sure that the opener is getting enough power and the breaker has not been fused. Make sure it is fully plugged into the right outlet. If the opener looks fine but the garage door won’t open with the help of a remote. You should check the batteries of the remote. Replace the batteries with new ones. If it still does not work, you may need to buy a new remote.

Faults of garage door mechanism:

If the garage door is sagging to one side while going up and down, you should check its mechanism. One obvious thing is to check the tracks that become clogged due to dirt and hardened grease. Use mild household detergent and a soft car brush to wash the tracks and then use any high-quality lubricant like WD-40 to smooth all the moving parts and rollers to make sure that they are will work properly.

Check the garage door tracks thoroughly to find out the dents, bumps, and damages on the tracks. They are connected to the trim of the door along with the ceiling with the help of brackets. With the passage of time, these brackets become loose and need to be replaced. Another problematic area could be garage door rollers. If you have a wood garage door then the strains on the screws can push them to wiggle and eventually loose. Use a large screwdriver to fix them.

NOTE: Be careful while working on garage door springs. These are heavy metal devices that can be dangerous if you don’t know how to handle them. It is advisable to leave them to the professionals.

Bottom line: It is good to determine what and how to do and when you need someone else who is really qualified, experienced, and trained to accomplish a job. Don’t take a chance on making creating more trouble by doing wrong work because it might cause bigger trouble.


Tips on Maintaining Garage Door Torsion Springs and Cables

The most important and critical part of the garage door is the torsion springs which support it to open and close smoothly. However, poorly installed, malfunctioning, or worn-out garage doors can present big safety trouble.

It is true that the garage door needs regular maintenance and upkeep services in order to stay in tip-top condition. To maintain the functionality of the garage door, you need to conduct the inspection, maintenance, and lubrication task on the system. As it is an important part to keep your garage door safe and operational at all. Unfortunately, the majority of homeowners are unaware of the fact that torsion springs work along with several other parts of the garage door which also need occasional safety checkups and maintenance services. It is always recommended that hire a professional garage door technician like, Newtown, CT garage door spring repair to keep your garage door functioning well.

If you are experiencing any trouble while opening and closing your garage door, you will have to pay close attention to the torsion springs which is the most obvious fact. If your garage door is older, the springs may probably wear out to a certain stage of their life.

The torsion springs installed on a garage door are tightly wound and placed under extreme pressure. Due to the risk of sudden breakage, the torsion springs have to be contained in order to avoid serious injuries or property damages. These containments are either in the form of external steel tubes or metal cables.

Even the contained torsion springs should be inspected by a professional garage door technician. They have the right tools and abilities to replace the springs if required. If your garage door has two independent springs and only one is worn out, it makes sense to replace both the springs simultaneously. Your garage door may create a chattering noise or squeaky sound when the garage door is going up and down. It does not necessarily indicate that your torsion springs are on their last legs and need to be replaced immediately.

Another clear sign indicates that the springs on your garage door need to be replaced, if there are frayed, hanging, or broken strips of cables. Irrespective of the quality and strength of the electric opener, it is a clear indication that the cables are about to break up. A sudden fall of cables could cause serious injuries. The frayed or broken cables need to be replaced by professional experts who are well familiar with the problems concerning springs and cables.

The garage door by itself is a bulky and heavy equipment and due to that weight, the torsion springs need to be adjusted under a high amount of pressure. Therefore, you should not try any mechanical alternatives on your own due to the high risks involved in performing this job. It would be advised that hire a professional garage door contractor to inspect these important components every year to avoid potential injuries and problems caused by broken torsion garage door springs.



Local Garage Door Repairs

Have you ever got ready to go for office or part but you experienced that your garage door would not function? It always happens in very inappropriate solutions because you are either leaving the home to go somewhere or coming back into your home when you realized that there is something wrong with your garage door. Visit here to get more details about professional garage door services. So if you discovered that you are in need of expert services from a professional garage door repair technician, you should only hire a local garage door company for a number of reasons including:

Speed of services: The large business organizations that probably have lots of branches and services in other cities are too busy in providing their services and you will not receive any type of individualized service. You will have to wait for a technician for days.  A local garage door company that offers fast and emergency services will be able to handle all that matters and give you fast, quick, and reliable services.

The reputation of the company: When you are consulting professional services for your garage door, the most important thing to know is their popularity and reputation. You can determine it by reading reviews provided by previous customers. If they have a lot of negative feedbacks that would not recommend their services then you need to determine it upfront. If you want to deal with a local company then it is fairly easy to determine what their clients wanted to say about them. You could just ask around to discover the best services in your area. If you want to hire a large garage door company with different branches in multiple areas then you probably won’t be able to determine their reputation in a timely.

Customer services: Sometimes a regional garage door company will offer as efficient customer services as a good local company. You just need to get in touch with the right person. If you are facing problems in choosing a company, you will have to line up them until you get someone the right person. A large company will have to reschedule their visit that could take several days or even weeks.

A local garage door repair company can also offer personalized and promotional services. If you feel any malfunctioning, you will be able to get quick solutions from someone who has qualified staff sent to your place.

There are just a few reasons why you should go with a local garage door company to help with your non-functioning garage door. It is always advisable to create a relationship with a small but efficient garage door company. There is also more to be explained about being able to trust the large companies that will help you. There is less room for errors while talking with an expert directly rather than discussing a problem with someone over a phone. They send their technician and have to evaluate the situation at your place.



Finding a Garage Door Repair Service Company

Garage doors don’t always function the way they are designed to which biggest trouble once an issue happens at an unexpected time. It is good to perform garage door maintenance on a regular basis if you want to protect your vehicle and home. However, not all the issues encountered with the garage door are always the same, and then what are the common signs of problems. What are the clear signs which explain to you that it is time to perform some maintenance activates? What are the possible solutions? And the important question is who can fix my garage door fast. In this article, you will find the most effective information about garage door services.

Common Problems and Their Solutions

Failure to pen or close the garage door which shows there is a problem with the garage door opener or remote. It is good to determine what type of opener your garage door has before dealing with it. If your garage door has an electric opener, it just needs to be reprogrammed. Another common problem is a jammed garage door which indicates two things, there may be dirty, clogged, or unaligned garage door tracks and hinges. They should be lubricated and aligned properly to make it functional. A sagging or falling garage door shows that it is not in a good working position. There may be loose or worn out torsion springs behind it.

The garage door is creating a load of rackets while opening or closing. Who would want to operate such a noisy garage door especially when you arrive home late at night? A malfunctioning garage door opener might be a cause behind the noises. There are there types of openers including is screw-driven, belt-driven, and chain-driven. The chain-driven is the noisiest type among them while the belt-driven is the quietest form. The screw-driven does not create much sound but they also need lubrication regularly. If the opener seems to be functioning smoothly then it may a problem with the balance of the garage door.

To check the balance of the garage door, pull the emergency garage door cord to allow the garage door to be operated manually. Open the garage door to its halfway then release to see if it stables at that point and doesn’t move further. In case, it does not, there may be a serious problem behind it. It is time to check the springs and hinges. Garage door springs that run down on each side of the garage door are easier to be replaced. While torsion springs that are placed on the top of the garage door should only be handled by a professional garage door technician. Never attempt a garage door spring repair and replacement projects on your own because it is risky and has the potential for injuries.

Meanwhile, garage door hinges should be replaced to fix grinding sounds. Call a professional to do this. If there are squeaky hinges that just need oiling periodically. Another cause behind the grinding sounds may be the worn-out bearings in the garage door rollers or pulleys. Again they should be handled by an expert technician. For malfunctioning garage door, it is best to get someone else helps who have the right expertise in this field.



Garage Doors Insulated With Polyurethane Foam Are More Energy Efficient

No matter where you live, an insulated garage door is a great addition to your home. I know there is nothing worse than coming from a warm house to a cold garage. Due to the cold temperature, you will not able to start your vehicle and you will have to warm it up in your attached garage which leaves carbon monoxide poison for your family.

The only solution to the problems is to install an insulation garage door. If you will have to do some creative activities or workshops in your garage, you will find that it is only possible to work during the fall or spring season to be comfortable from excessive cold or heat. In case, the walls of your garage are already insulated then it is very easy to make it more energy-efficient. Definitely, installing an insulated garage door is also very important. There are plenty of garage door companies including Ace Garage Door Fort Worth which offer a wide range of insulated garage doors to help you in keeping your energy cost under control.

A well-insulated garage door will make your place a comfortable zone in any season. The same goes for the comfort of home if your garage has a side entrance door. Having a quality insulated garage door will be beneficial to keep your building cool or warm depending on the season. Of course, a garage door is the biggest source of loose energy. Most insulated garage doors with the Styrofoam sheet are not the right insulator. When it concerns to garage door prices, high quality insulated garage door will save a lot of money by keeping your energy bills low.

Insulated garage doors with loose sheets of Styrofoam always have lots of space for cold or warm air to come in. Most garage door dealers use cheap and low-quality foam to save their manufacturing costs. They also defend their fault by saying it is cheaper to change the damaged panel by simply using an insulated panel. Garage door technicians suggested that polyurethane foam-filled garage door panels facilitate you with higher R-value insulation than ordinary foam sheeted panels against almost the same cost. Insulated garage doors with polyurethane foam have no gaps to let the cool air in or out. The foam is filled in every corner of the panel. In addition to this, an insulated garage door with urethane foam is stronger and secure.

Insulated panels must have good joint seals between them. Good seals also needed along with the sides of the walls and header as well. Most energy-efficient garage doors also have good weather sealing on the bottom panel. They should be thick and flexible enough to adjust the contour of garage’s floor. Weather sealing should be able to remain flexible no matter what the temperature is inside or outside the garage. Polyurethane foam insulated garage doors will have remarkable long-lasting vinyl tops, end, and bottom to save the insulation sheet from environmental damages.

Making the efforts to insulate your garage and garage door will pay you in terms of reduced energy bills while keeping your place warm in winter and cool in summer. In many situations, the cooling and heating which escaped from your home will be enough to make your garage a comfortable place. It is good to remember that any garage door insulated with polyurethane foam offers the highest R-value if it is created with proper seals. Its cost can easily be recovered through energy saving.